Information Technology Services (ITS)

Wireless Configuration for Microsoft Windows 7 Enterprise SP1

If you are a current Hudson Valley Community College student or employee you may connect your Windows 7 computer to our wireless network by following the instructions below.

Step 1

Select the Network icon in the system tray represented by the 4 bars with the yellow splotch. (Or, Open the Start Menu and select Control Panel, then Network and Internet.)

Select Open Network and Sharing Center.

Network and Internet Control Panel

Step 2

Select Manage Wireless Networks in the upper left area.

Network and Sharing Center

Step 3

Select the Add button.

Manage Wireless Networks

Step 4

Select Manually create a network profile.

Manually connect to a wireless network

Step 5

Enter the following values:

Network Name: HVCC-COMM
Security Type: WPA2-Enterprise
Encryption Type: AES

Select the Next button.

Wireless Network Information

Step 6

Select Change connection settings.

Change Connection Settings

Step 7

Select the Security tab. Change Security Type to AES.

Check Remember my credentials for this connection each time I'm logged on.

Select the Settings button.

Wireless Network Properties

Step 8

Uncheck Validate server certificate.

Make sure Authentication Method is set to Secured password (EAP-MSCHAP v2).

Uncheck Enable Fast Reconnect.

Select the Configure button.

Protected EAP Properties

Step 9

Uncheck Automatically use my Windows logon name and password.

Select the OK button twice.

EAP MSCHAPv2 Properties

Step 10

Select Advanced settings.

Wireless Network Properties

Step 11

Please Note: Depending on the Windows 7 version, you may not have this option.

Select the 802.1X settings tab.

Select User authentication from the drop down menu.

Select OK for the remaining two panels.

Select the Close button for the manual wireless network window.

Finally, close the Manage Wireless Networks window.

Advanced Settings

Step 12

You should receive a notification near the system tray that additional information is required to connect to the network. Select this notification.

Windows System Notification

Step 13

Enter your HVCC username and password in the required fields.

Select the OK button to complete the authentication process.

You would be connected to the wireless network within 15-20 seconds.

Network Authentication